COLLAPSING KATANA – AKAME – AKAME GA KILL! – EASY TO PRINT – NO SUPPORT

Murasame Katana from Akame Ga Kill!, printed in place with No Supports

PRINTED ON SITE VERSION + ASSEMBLY VERSION

For the PRINT-IN-PLACE version, the blade is flat at the end so it can stick to the build plate, if you want the pointed blade you have to choose one of the other 2 versions.

The blade is thin, so it needs to be fixed well to the build plate. I recommend using RAFT plate Adhesion.

If you are going to print the “print in place” version, I recommend you test print the “blade_print_test.stl” file before printing the full katana.

It works best when you leave the seams on the back of the blade.

Katanas are between 95 and 99 cm long, depending on how far you push the blades. Katana Handle 24.5cm + Blade 68.5/73.5cm

If you liked this one, take a look at my other creations:

https://cults3d.com/en/users/PlayArt3D/creations

Prints well in PLA

For stronger printing I recommend using PLA+ / PLA850

Nozzle: 0.4mm

If you need any help or have any questions, please feel free to contact me!